Facility Summary – Strategically located on California Steel Industries Fontana, California campus. Our facility encompasses approximately 170,000 square feet of processing, storage, and finished goods space. Staub Metals utilizes only state of the art processing equipment including a multi cut blanking line and precision slitting machine to service all of your close tolerance metal requirements. Our facility is serviced by both rail and truck allowing Staub Metals to handle up to 60,000 pound coils.
Fontana Equipment:
ABBEY ETNA SLITTING LINE
| Material: |
All commercial grade carbon steel, both coated and uncoated. Some grades of stainless steel and aluminum may also be processed on an inquiry basis. Hot rolled can be run on this machine. |
| Shear Strength: |
50,000 PSI – Maximum |
| Coil Weight: |
60,000 lbs. Maximum Entry & Exit |
| Coil Width: |
61” Maximum Entry - 60” Max Set Up (Arbor) |
| Coil OD: |
72” Maximum
35” Minimum |
| Coil ID: |
20” to 24” Entry & Exit |
| Gauge: |
.250” Maximum
.010” Minimum |
| Slit Width Accuracy: |
+/-.005” |
|
Low Speed Range:
(pull thru) |
3 cuts @ .250” thick
7 cuts @ .188” thick
11 cuts @ .150” thick
14 cuts @ .120” thick
20 cuts @ .090” thick
22 cuts @ .075” thick
25 cuts @ .036” thick & lighter |
High Speed Range:
(pull thru) |
21 cuts @ .075” thick
22 cuts @ .060” thick
24 cuts @ .042” thick
25 cuts @ .036” thick & lighter |
| Free Loop Drive: |
Geared in at high speed range |
|
